(Your shopping cart is empty)
You are here: Drop Zone > Hoppers and Accessories > Cyclone Feed

Tippmann Cyclone Feed Hoppers and Upgrades

Here at Bunker Thump, we offer a variety of upgrades for the Tippmann Cyclone. You can increase, or even decrease your loader size depending on your need. If you need speed, then check out the Tippmann Cyclone Feed Upgrades. We have a ton of accessories to get that Cyclone Feed System craking out insane rates of fire.
Sort By:
1
Cyclone Max Upgrade with Zero Kick SE Hammer Cyclone Feed Upgrade Ludicrous Speed Max Kit Cyclone Feed Upgrade Kit - Black [98,A5,X7] Cyclone Upgrade Combo - Deluxe
TechT Cyclone Max Upgrade with Zero Kick SE Hammer - Black
In Stock!
Price: $179.95
Special: $149.95
TechT Cyclone Feed Upgrade Ludicrous Speed Max Kit - Black
In Stock!
List Price: $124.95
Price: $109.99
TechT Cyclone Feed Upgrade Kit - Black [98,A5,X7] - Black
In Stock!
List Price: $99.99
Price: $89.99
LAPCO Cyclone Upgrade Combo - Deluxe
In Stock!
List Price: $94.99
Price: $82.99
The Ludicrous Speed Upgrade Kit NOW with Zero Kick SE Hammer.  The next step in Techt complete upgrade kits is here.

Includes both the short and the double stack upper paddle designs.
The Ludicrous Speed Upgrade Kit is designed to take your Tippmann Cyclone Feed to the next level in performance.

These parts replace virtually all the parts in your cyclone feed, and allow it to run at max speed and efficiency.
Fits A5, X7, and all 98's

Includes Vortex Mod, Lightening Rod, and Q.E.P.H.
Includes:
Ratchet Upgrade- Our aluminum ratchet upgrade for the A5/X7/98 Cyclone was made to increase rate of fire and provide a higher level of durability within your cyclone.
Cyclone Upgrade Combo Cyclone Feed System [98 Custom Series, Alpha Black, Project Salvo] TA30046 Tippmann Cyclone Feed System - Complete Cyclone Feed QEPH [98,A5,X7]
LAPCO Cyclone Upgrade Combo
In Stock!
List Price: $79.99
Price: $69.99
TA30046 Tippmann Cyclone Feed System - Complete
In Stock!
List Price: $60.00
Price: $45.00
Special: $38.95
TechT Cyclone Feed QEPH [98,A5,X7] - Black
In Stock!
List Price: $44.95
Price: $39.95
Special: $34.99
Includes:
Ratchet Upgrade- Our aluminum ratchet upgrade for the A5/X7/98 Cyclone was made to increase rate of fire and provide a higher level of durability within your cyclone.
Works on 98 Custom, 98 Custom Pro, 98 Custom ACT , 98 Custom Pro ACT, 98 Custom Platinum Series, 98 Custom Pro Platinum Series, Alpha Black, and the Project Salvo.

The A-5 Cyclone Feed system is now available for your Custom Pro or 98 Custom marker.
Does NOT include fittings. Improve the speed and efficiency of your Cyclone Feed System for a faster rate of fire.
Cyclone Feed Vortex Mod SS [98,A5,X7] E-Z View Cyclone Feed Housing Kit with Body and Bottom Plate Cyclone Feed Ratchet Upgrade [98,A5,X7] High Flow QEV Kit - 1/8 or 3/32 Inch [Cyclone Feeds, Response Triggers]
TechT Cyclone Feed Vortex Mod SS [98,A5,X7]
The manufacturer's out, but we're not. Only 7 left! Ships within 1 business day.
List Price: $42.95
Price: $39.95
Special: $34.99
TechT E-Z View Cyclone Feed Housing Kit with Body and Bottom Plate - Smoke
Only a few left! Ships within 1 business day.
Price: $34.99
Special: $34.13
LAPCO Cyclone Feed Ratchet Upgrade [98,A5,X7]
In Stock!
List Price: $39.95
Price: $34.95
Special: $32.99
Palmer's Pursuit Shop High Flow QEV Kit - 1/8 or 3/32 Inch [Cyclone Feeds, Response Triggers]
Ships within 2 weeks!
List Price: $39.95
Price: $32.95
Special: $29.95
The Vortex Mod SS now incorporates a stainless steel axle and design changes to make it the most
durable and easiest upgrade to install.
. LAPCO has released the aluminum ratchet upgrade for the A5/X7/98 Cyclone. This product was made to increase rate of fire and provide a higher level of durability within your cyclone. This upgrade includes threaded pins making it a simple install. Allows the stock A5 to operate faster by venting the accessory air out a High Flow QEV, not back into the line.
Rip Clip Adapter - Mount BT Rip Clip to A5 Gun - Lighter 2nd Generation [A5] Uni-Flow Piston Housing [Cyclone Feeds] - Black High Flow QEV Kit - 1/16 Inch [Cyclone Feeds, Response Triggers] E-Z View Cyclone Feed Housing Kit
LAPCO Uni-Flow Piston Housing [Cyclone Feeds] - Black - Black
In Stock!
List Price: $37.99
Price: $35.95
Special: $29.95
TechT E-Z View Cyclone Feed Housing Kit - Smoke
In Stock!
List Price: $29.99
Price: $27.99
Special: $24.99
Mount a BT Rip Clip on an A5 Lapco Uni-Flow Piston Housing [Cyclones] - Black Allows the stock A5 to operate faster by venting the accessory air out a High Flow QEV, not back into the line. .
Cyclone Feed Lightening Rod [98,A5,X7] PosiFeed Soft Paddles - 3-Paddle Combo [Cyclone Feeds] Turbo T-3 Offset Hopper 300 With Window [Cyclone Feeds] Cyclone Feed Squishy Paddles [98,A5,X7]
TechT Cyclone Feed Lightening Rod [98,A5,X7]
In Stock!
List Price: $29.95
Price: $24.99
LAPCO PosiFeed Soft Paddles - 3-Paddle Combo [Cyclone Feeds]
In Stock!
List Price: $29.95
Price: $26.95
Special: $22.95
TechT Cyclone Feed Squishy Paddles [98,A5,X7] - Black
In Stock!
List Price: $23.95
Price: $19.99
From TechT:

The Lightening Rod is our latest modification for increasing the performance of your Tippmann Cyclone Feed.

The Lightening Rod is designed to work in conjunction with our Vortex Mod.
. . The Squishy Paddles were designed to help people using the cyclone feed eliminate ball breakage due to cold tempertures, brittle paint and high feed rates.

Includes both the short and the double stack upper paddle designs.
Adapter for Cyclone Feeds with Response Trigger Kits [98, Salvo, A5 with additional hose] Turbo T-2 Offset Hopper 185 [Cyclone Feeds] Turbo T-4 Offset Hopper 450 [Cyclone Feeds] Cyclone Feed Premium Soft Paddles
Allen Paintball Products Turbo T-2 Offset Hopper 185 [Cyclone Feeds] - Black
The manufacturer's out, but we're not. Only 12 left! Ships within 1 business day
List Price: $19.95
Price: $16.95
Allen Paintball Products Turbo T-4 Offset Hopper 450 [Cyclone Feeds] - Black
In Stock!
List Price: $24.95
Price: $21.95
Special: $16.95
LAPCO Cyclone Feed Premium Soft Paddles
In Stock!
List Price: $19.95
Price: $15.99
This adapter kit is needed if you're wanting to put the Cyclone Feed on your 98 with the RT upgrade.
This will upgrade all the hoses and fittings on your gun from the smaller 1/16 Inch inner diameter to the larger 1/8 Inch inner diameter.
The NEW Turbo T-2 Offset Hopper.
Holds 185 Rounds.
450 round capacity LAPCO's premium soft paddles are designed for Tippmann Cyclones.  This product will decrease the amount of ball breakage within the Cyclone.  Soft paddles also allow players to shoot at an increased rate of fire no problem.
Squishy Paddles - Original Design [Cyclone Feed Hoppers] Offset Hopper Elbow with Cap [Cyclone Feeds] 10-32 UEF to 1/16 ID Low Profile Fitting Tac-Cap II [Cyclone Feeds]
Trinity Offset Hopper Elbow with Cap [Cyclone Feeds] - Black
Ships within 2 weeks!
List Price: $19.95
Price: $15.95
Special: $13.95
Original Squishy Paddles by TechT are made to go fast and full auto! Gentler feeding and faster rates of fire! Trinity Paintball Offset Hopper Elbow with Cap is designed to give you a clear view down the sights of the gun and provide clearance when mounting a scope. . 43 paintball capacity tactical Cyclone feed hopper with clear window
Tac-Cap E-Z View Cyclone Feed Cover Hopper Sound Cover [A5 Hoppers] TA30012 Tippmann Feeder Cupped Sprocket - Lower [Phenom]
Pro-Team Products Tac-Cap - Black
In Stock!
List Price: $10.95
Price: $9.95
Special: $8.95
TechT E-Z View Cyclone Feed Cover - Clear
In Stock!
List Price: $9.99
Price: $8.99
Special: $7.99
Allen Paintball Products Hopper Sound Cover [A5 Hoppers] - Advantage Timber / Black - Reversible
Only a few left! Ships within 1 business day.
List Price: $12.95
Price: $9.95
Special: $7.79
TA30012 Tippmann Feeder Cupped Sprocket - Lower [Phenom]
In Stock!
List Price: $10.00
Price: $7.94
Special: $7.48
. . Advantage Timber Camo for wood play.
Reverse to Black for covert ops.
This is the lower sprocket that come installed on the X-7 Phenom.
Interlocking, shaped and cupped for better feeding and a smoother rotation.
Cyclone Feeder Piston Rebuild [A5, X7, Cyclone Feeds] TA30011 Tippmann Feeder Cupped Sprocket - Upper [Phenom] Cylinder Hose - 1-1/4 Inch Long Cylinder Hose - 1-1/4 Inch Long
Reliable Performance Modifications Cyclone Feeder Piston Rebuild [A5, X7, Cyclone Feeds]
Ships within 1 week!
List Price: $9.25
Price: $8.00
Special: $6.50
TA30011 Tippmann Feeder Cupped Sprocket - Upper [Phenom]
In Stock!
List Price: $7.00
Price: $5.94
Special: $5.78
. This is the upper sprocket that come installed on the X-7 Phenom.
Interlocking, shaped and cupped for better feeding and a smoother rotation.
Upgrade the look of your response trigger with these custom color hoses!

This is the shorter hose that goes to the cyclone feed system.
Upgrade the look of your response trigger with these custom color hoses!

This is the shorter hose that goes to the cyclone feed system.
Cylinder Hose - 1-1/4 Inch Long Cylinder Hose - 1-1/4 Inch Long Cylinder Hose - 1-1/4 Inch Long Cyclone Hose - 1.5 Inch Long
Upgrade the look of your response trigger with these custom color hoses!

This is the shorter hose that goes to the cyclone feed system.
Upgrade the look of your response trigger with these custom color hoses!

This is the shorter hose that goes to the cyclone feed system.
Upgrade the look of your response trigger with these custom color hoses! Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
Cyclone Hose - 1.5 Inch Long Cyclone Hose - 1.5 Inch Long Cyclone Hose - 1.5 Inch Long Cyclone Hose - 1.5 Inch Long
Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
Cyclone Hose - 1.5 Inch Long
Upgrade the look of your cyclone feed with these custom color hoses!

This is the correct cylinder hose for the standard cyclone feed.  And it fits correctly on to the 20-07 banjo 1/16 inch fittings.
   
 
1
Product Index | Category Index
Copyright © Drop Zone Paintball. All Rights Reserved. Terms of Use
Sell Online with Volusion. Google+